Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

H

Hanna, R and Sutcliffe, Mark and Carswell, D and Charlton, Peter and Mosey, Stephen (2023) Volume integral model for algebraic image reconstruction and computed tomography. Insight - Non-Destructive Testing and Condition Monitoring, 65 (9). pp. 484-491. ISSN 1354-2575

L

Lake, Kelvin (2021) Design Methodology for the Utilisation of A Structural Orthotropic Composite Materials by Micro-Enterprises. Doctoral thesis, University of Wales Trinity Saint David.

Liaptsis, Georgios and Liaptsis, Dimosthenis and Charlton, Peter (2014) Demonstration of a Novel Equation for the Near Field Distance Calculation for Annular Phased Array Transducers. The e-Journal of NDT, 19 (11). ISSN 1435-4934

Liaptsis, Georgios and Liaptsis, Dimosthenis and Charlton, Peter (2015) Directivity Investigation of two Annular Phased Array Transducers. The e-Journal of NDT, 20 (4). ISSN 1435-4934

Liaptsis, Georgios and Liaptsis, Dimosthenis and Charlton, Peter and Wright, Ben (2015) Focal Law Calculations for Annular Phased Array Transducers. The e-Journal of NDT, 20 (2). ISSN 1435-4934

M

Mosey, Stephen and Charlton, Peter and Wells, Ian (2013) Resolution enhancement of ultrasonic B-mode images. Insight - Non-Destructive Testing and Condition Monitoring, 55 (2). ISSN 1354-2575

P

Perry, William and McDonald, Malcolm and Charlton, Peter (2014) Quantitative Analysis of Big End Journal Form and Bolt Installation using Ultrasonic Time of Flight Measurements. The e-Journal of NDT, 19 (10). ISSN 1435-4934

Pullen, Ashley and Charlton, Peter (2015) 2.5D Finite Element Simulation – Eddy Current Heat Exchanger Tube Inspection using FEMM. The e-Journal of NDT, 20 (7). ISSN 1435-4934

S

Sutcliffe, Mark and Charlton, Peter and Weston, Miles (2014) Multiple virtual source aperture imaging for non-destructive testing. Insight - Non-Destructive Testing and Condition Monitoring, 56 (2). ISSN 1354-2575

Sutcliffe, Mark and Charlton, Peter and Weston, Miles (2016) Virtual source aperture image processing methods for non-destructive testing. Insight - Non-Destructive Testing and Condition Monitoring, 58 (2). ISSN 1354-2575

Sutcliffe, Mark and Weston, Miles and Charlton, Peter and Donne, Kelvin E. and Wright, Ben and Cooper, Ian (2013) Full matrix capture with time-efficient auto-focusing of unknown geometry through dual-layered media. Insight - Non-Destructive Testing and Condition Monitoring, 55 (6). ISSN 1354-2575

Sutcliffe, Mark and Weston, Miles and Charlton, Peter and Dutton, Ben and Donne, Kelvin E. (2012) Virtual source aperture imaging for non-destructive testing. Insight - Non-Destructive Testing and Condition Monitoring, 54 (7). ISSN 1354-2575

Sutcliffe, Mark and Weston, Miles and Dutton, Ben and Charlton, Peter and Donne, Kelvin E. (2012) Real-time full matrix capture for ultrasonic non-destructive testing with acceleration of post-processing through graphic hardware. NDT and E International, 51. pp. 16-23. ISSN 0963-8695

W

Wood, Michael and Charlton, Peter and Yan, Dawei (2014) Ultrasonic Evaluation of Artificial Kissing Bonds in CFRP Composites. The e-Journal of NDT, 19 (12). ISSN 1435-4934

Z

Zhang, Lintao and Cameron, Ian M. and Ledger, Paul D. and Belblidia, Fawzi and Pearson, Neil R. and Charlton, Peter and Sienz, Johann (2023) Effect of Scanning Acceleration on the Leakage Signal in Magnetic Flux Leakage Type of Non-destructive Testing. Journal of Nondestructive Evaluation, 42 (1). ISSN 1573-4862