Virtual source aperture image processing methods for non-destructive testing

Sutcliffe, Mark and Charlton, Peter and Weston, Miles (2016) Virtual source aperture image processing methods for non-destructive testing. Insight - Non-Destructive Testing and Condition Monitoring, 58 (2). ISSN 1354-2575

[img]
Preview
Text
Sutcliffe, M., Charlton, Peter, + Weston, M.(2016)Virtual source aperture image processing methods for non-destructive testing .pdf - Published Version
Available under License CC-BY-NC Creative Commons Attribution Non-commercial.

Download (1MB) | Preview

Abstract

Until recently, the processing of ultrasonic array data has been based on parallel transmission strategies enabling beam forming to occur within the material, with summing of the time domain signals performed in hardware on reception. These time domain signals are then typically stacked in software to produce B-scan images. Since the introduction of full matrix capture there has been advancement in post-processing algorithms, allowing for fully-focused inspections to be undertaken by dividing the area to be inspected into a grid of pixels and treating each as a focal point (the total focusing method). However, due to the large number of time domain signals associated with this approach, processing speed is often a limiting factor. Virtual source aperture (VSA) is an ultrasonic technique in which a highly divergent beam is generated using a focal law to simulate emission from a virtual point positioned some distance behind the transducer. When combined with each element of the array acting as a receiver, sufficient time domain signals may be acquired to allow B-scan images to be generated in real-time. In this paper, various imaging algorithms are presented, where the ability to image a series of point-like reflectors is demonstrated. Due to its high data acquisition speed, low computational requirement and reduced data size, VSA is shown to offer significant performance advantages over other advanced ultrasonic techniques, such as FMC.

Item Type: Article
Uncontrolled Keywords: Virtual source aperture Full matrix capture Ultrasonic array data
Subjects: Q Science > QC Physics
T Technology > T Technology (General)
T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TJ Mechanical engineering and machinery
T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Institutes and Academies > Wales Institute for Science & Art (WISA) > Academic Discipline: Engineering
Depositing User: Professor Peter Charlton
Date Deposited: 18 Jan 2017 15:35
Last Modified: 11 Sep 2024 17:00
URI: https://repository.uwtsd.ac.uk/id/eprint/678

Administrator Actions (login required)

Edit Item - Repository Staff Only Edit Item - Repository Staff Only